It is not recommended that you touch the glass portion of the bulb for any reason. Oils from your hands can cause the bulb to shatter once it heats up. Handle the bulb by its base only.
OLM H1 HID Kit - 6000k - 2015-2021 Subaru WRX
OLM H1 HID Kit - 6000k
Highlights:
- Components rival and outperform many OEM setups.
- Requires removal of the headlight assembly and lens.
- Significantly improved lighting.
- Includes all components to retrofit 1 entire vehicle.
- Hardware specifically designed for the WRX.
- OLM's split kit combines an affordable H1 HID kit with Morimoto's precision projectors and vehicle-specific mounting brackets.
- Aimed at putting light exactly where you need it.
6000K HID Kit
A complete HID retrofit is how you get the sharpest cutoff around. These components rival and actually outperform many OEM setups. While they do require removal of the headlight assembly and lens, the payoff is high!
1 kit includes the proper components to retrofit 1 entire vehicle. The hardware is specifically designed for the WRX.
Enhanced Lighting For Easy Driving
OLM's split kit combines an affordable H1 HID kit with Morimoto's precision projectors and vehicle specific mounting brackets. Out of the dark and into the light. That's the goal of this kit. Put the light exactly where you need it. This is a great upgrade for any WRX base or premium model. The Retro-Quik kits bring us closer to a plug and play option with its brackets that allow you to mount the new projectors without cutting.
Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the 2015-2021 WRX, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!
Morimoto H1 7.0 Projectors: Let's keep it simple and make a list of everything new about the 7.0. The optically clear lens. The 7-signed metal lens holder. The side-push bi-xenon solenoid mechanism. The die-cast radically curved cutoff shield. The foreground limiter. The reflector bowl. The IR, high-temp resistant reflector finish. The threaded shaft and it's precision and added length. The results! The beam is wider. The distribution of light more proper. Your ability to see is better.
Includes OLM ballasts, ignitors, bulbs, and HID relay.
NOTE: This kit comes with WRX specific hardware to mount the projectors. Includes 100mm housing caps for sealing the rear of the headlights.
Optional Item
RetroRubber - If you do not have spare butyl sealant in hand, RetroRubber or other butyl sealant is HIGHLY RECOMMENDED. The OEM sealant may not do a good job of resealing the headlight! TRS RetroRubber can be stretched to the proper length and width to fit the headlight casing channel.
SubiSpeed Install Video (Older Morimoto Retro-quik Kit Showed)
This video documents the retrofitting process. The kit shown was BEFORE custom brackets were available. This kit includes them to BYPASS cutting the housing and utilizes H1 bulbs instead of D4S.
FAQ
Product Information
Product Information
Shipping & Returns
Shipping & Returns
OLM H1 HID Kit - 6000k - 2015-2021 Subaru WRX
OLM H1 HID Kit - 6000k - 2015-2021 Subaru WRX
OLM H1 HID Kit - 6000k
Highlights:
- Components rival and outperform many OEM setups.
- Requires removal of the headlight assembly and lens.
- Significantly improved lighting.
- Includes all components to retrofit 1 entire vehicle.
- Hardware specifically designed for the WRX.
- OLM's split kit combines an affordable H1 HID kit with Morimoto's precision projectors and vehicle-specific mounting brackets.
- Aimed at putting light exactly where you need it.
6000K HID Kit
A complete HID retrofit is how you get the sharpest cutoff around. These components rival and actually outperform many OEM setups. While they do require removal of the headlight assembly and lens, the payoff is high!
1 kit includes the proper components to retrofit 1 entire vehicle. The hardware is specifically designed for the WRX.
Enhanced Lighting For Easy Driving
OLM's split kit combines an affordable H1 HID kit with Morimoto's precision projectors and vehicle specific mounting brackets. Out of the dark and into the light. That's the goal of this kit. Put the light exactly where you need it. This is a great upgrade for any WRX base or premium model. The Retro-Quik kits bring us closer to a plug and play option with its brackets that allow you to mount the new projectors without cutting.
Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the 2015-2021 WRX, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!
Morimoto H1 7.0 Projectors: Let's keep it simple and make a list of everything new about the 7.0. The optically clear lens. The 7-signed metal lens holder. The side-push bi-xenon solenoid mechanism. The die-cast radically curved cutoff shield. The foreground limiter. The reflector bowl. The IR, high-temp resistant reflector finish. The threaded shaft and it's precision and added length. The results! The beam is wider. The distribution of light more proper. Your ability to see is better.
Includes OLM ballasts, ignitors, bulbs, and HID relay.
NOTE: This kit comes with WRX specific hardware to mount the projectors. Includes 100mm housing caps for sealing the rear of the headlights.
Optional Item
RetroRubber - If you do not have spare butyl sealant in hand, RetroRubber or other butyl sealant is HIGHLY RECOMMENDED. The OEM sealant may not do a good job of resealing the headlight! TRS RetroRubber can be stretched to the proper length and width to fit the headlight casing channel.
SubiSpeed Install Video (Older Morimoto Retro-quik Kit Showed)
This video documents the retrofitting process. The kit shown was BEFORE custom brackets were available. This kit includes them to BYPASS cutting the housing and utilizes H1 bulbs instead of D4S.
FAQ
It is not recommended that you touch the glass portion of the bulb for any reason. Oils from your hands can cause the bulb to shatter once it heats up. Handle the bulb by its base only.
$28.50
Original: $95.00
-70%OLM H1 HID Kit - 6000k - 2015-2021 Subaru WRX—
$95.00
$28.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OLM H1 HID Kit - 6000k
Highlights:
- Components rival and outperform many OEM setups.
- Requires removal of the headlight assembly and lens.
- Significantly improved lighting.
- Includes all components to retrofit 1 entire vehicle.
- Hardware specifically designed for the WRX.
- OLM's split kit combines an affordable H1 HID kit with Morimoto's precision projectors and vehicle-specific mounting brackets.
- Aimed at putting light exactly where you need it.
6000K HID Kit
A complete HID retrofit is how you get the sharpest cutoff around. These components rival and actually outperform many OEM setups. While they do require removal of the headlight assembly and lens, the payoff is high!
1 kit includes the proper components to retrofit 1 entire vehicle. The hardware is specifically designed for the WRX.
Enhanced Lighting For Easy Driving
OLM's split kit combines an affordable H1 HID kit with Morimoto's precision projectors and vehicle specific mounting brackets. Out of the dark and into the light. That's the goal of this kit. Put the light exactly where you need it. This is a great upgrade for any WRX base or premium model. The Retro-Quik kits bring us closer to a plug and play option with its brackets that allow you to mount the new projectors without cutting.
Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the 2015-2021 WRX, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!
Morimoto H1 7.0 Projectors: Let's keep it simple and make a list of everything new about the 7.0. The optically clear lens. The 7-signed metal lens holder. The side-push bi-xenon solenoid mechanism. The die-cast radically curved cutoff shield. The foreground limiter. The reflector bowl. The IR, high-temp resistant reflector finish. The threaded shaft and it's precision and added length. The results! The beam is wider. The distribution of light more proper. Your ability to see is better.
Includes OLM ballasts, ignitors, bulbs, and HID relay.
NOTE: This kit comes with WRX specific hardware to mount the projectors. Includes 100mm housing caps for sealing the rear of the headlights.
Optional Item
RetroRubber - If you do not have spare butyl sealant in hand, RetroRubber or other butyl sealant is HIGHLY RECOMMENDED. The OEM sealant may not do a good job of resealing the headlight! TRS RetroRubber can be stretched to the proper length and width to fit the headlight casing channel.
SubiSpeed Install Video (Older Morimoto Retro-quik Kit Showed)
This video documents the retrofitting process. The kit shown was BEFORE custom brackets were available. This kit includes them to BYPASS cutting the housing and utilizes H1 bulbs instead of D4S.
FAQ
It is not recommended that you touch the glass portion of the bulb for any reason. Oils from your hands can cause the bulb to shatter once it heats up. Handle the bulb by its base only.
